Quick Insert Replacement
E-Z Burr’s carbide system uses the same patented locking system as the HSS series, enabling you to change inserts in seconds with the tool still in the machine. All it takes is a one-eighth turn. Just follow these three steps for easy insert replacement.
1. Unlock the blade with a simple 1/8 counterclockwise turn of the locking screw.
2. Once in the unlocked position the insert can be pulled up and out of the holder.
3. With the flex arm at its most extended position, engage the slot of the insert over the tip of the flex arm. Then carefully slide the end of the insert back into the arbor slot until the flex arm is lowered into position. Lock the flex arm back into place with a simple 1/8 clockwise turn of the locking screw.