1. With E-Z Burr’s deburring tool, cutting pressure adjusts with a simple turn of the Allen screw    conveniently accessed on the side of the shank.

2. This provides a range of cutting pressures from extreme low to extreme high, depending on the nature of the burr size, the amount of material to be removed and the composition of the work piece.

3. Once the tension is set, low-break Loctite seals the adjusting screw to maintain torque tension, so part-to-part consistency is assured. If the Loctite breaks down and the screw loosens, re-apply a small drop of Loctite 222 to the adjustment screw.